Commercial inflatables make every special occasion celebrated by kids and kids-at-heart extra unique and memorable. Also, starting a bounce house rental business is fulfilling. To ensure you turn this into a profitable venture, you need to take good care of your inflatables. One way to do this is to learn how to take it down and package it into the storage bag.
Rolling a giant bounce house after every use can be challenging, especially for first-timers. But once you learn how to do it properly each time, it can become easier and more convenient. Follow this step-by-step guide on storing inflatables correctly:
- Get started by deflating your inflatable unit completely. Switch off the blower, disconnect the blower tube and open the deflation zappers. Wait for the inflatable to fall to the ground and lay it flat.
- Empty the air out of the inflatable by walking on it. Pull the top front and back, then tuck the cone tops. Make sure the surface is even and completely deflated to ensure you have a properly rolled inflatable unit later on.
- Start folding the material like you are folding a large bedsheet. Since the size of the inflatable unit varies, a good rule of thumb is to divide it into thirds or fourths visually. Fold the side opposite of the blower tube over with the fold ending at the side of the step. Make a straight line to the side of the deflation zipper, and then fold the remaining third back over.
- Overlap all the designs and inside folds of the inflatable to prevent them from being in contact with the ground. Leave the air ports out to let the remaining air escape as you roll.
- Push out excess air by gently walking over the surface of the folded inflatable unit toward air ports. Once you have deflated it completely and folded it properly, get ready to roll it up for storage.
- Place tie straps under the inflatable unit at the end of the air port. Doing this will help you avoid lifting the heavy inflatable unit to place tie straps after it was rolled.
- Roll at the end opposite blower ports, then roll back towards the deflation zipper. As usual, push out all the remaining air as you roll the unit. You must roll it as straight and tight as possible, meaning they should not sag. Keep the roll lined up and tuck overlapping material. Note that the finished roll will be turned to a free-standing position, making sure that one side of the unit is as “flush” as possible.
- After rolling up the inflatable unit completely, unroll it back one foot to tuck away exposed blower ports. Roll it back to completion afterward. The bottom of the inflatable unit should only be the exposed part during transport.
- Use the straps to tie off the roll and secure the unit in place. Check for loose or protruding extra material and tuck it away.
- Finally, turn the rolled unit to a standing position. Pull your storage bag from the top down and place the unit inside the bag for transport.
Conclusion
Commercial-grade bounce houses are wonderful additions to almost every party, which is why venturing into an inflatable bounce house rental business is beneficial. If you decide to start this kind of business, keep in mind that your inflatable unit is one of your most important investments. Therefore, remember this step-by-step guide and know it by heart to ensure an efficient and hassle-free deflation and rolling-up process.
If you are looking for high-quality commercial bounce houses for sale, then you’ve come to the right place! We are Jungle Jumps, and we take pride in being a worldwide supplier of commercial-grade inflatables. From bounce houses, slides, to customized units, you can find the inflatable you need for your business from us. Contact us now to purchase some of our inflatables!